Toshiba Password Utility - Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz User Manual

User manual
Hide thumbs Also See for M105-S1021 - Satellite - Celeron M 1.46 GHz:
Table of Contents

Advertisement

TOSHIBA Password Utility

The TOSHIBA Password Utility provides two levels of password security:
User and Supervisor.
Passwords set in TOSHIBA Password Utility are different from the Windows
login password.
User Password
To start the utility, point to or click the following items:
Launch TOSHIBA Assist
Registered
Click to register a password of up to 8 characters. After a password is
set, you will be prompted to enter it when you start the computer.
Not Registered
Click to delete a registered password. Before you can delete a password,
you must first enter the current password correctly.
Owner String (text box)
You can use this box to associate text with the password. After you enter
text, click Apply or Ok, then, each time the computer is switched on,
this text will be displayed along with the prompt for the password.
Supervisor password
If you set a supervisor password, some functions will be restricted when a
user logs on with the user password. To set a supervisor password:
TOSHIBA Assist
This utility lets you do the following:
Register or delete the supervisor password.
Specify restrictions for general users.
Starting the computer by password
If you have already registered a password, there are two ways to start the
computer:
Swipe your fingerprint on the sensor if you have already registered the
fingerprint with the Fingerprint utility and enabled Fingerprint Power-
on Security. If you would not like to swipe your finger or cannot
authenticate the fingerprint for some reasons, push the BkSp key to skip
the fingerprint authentication screen. You can try to swipe the fingerprint
up to five times. If you failed fingerprint authentication more than five
times, you must enter the password manually to start the computer.
Enter the password manually.
The password is necessary only if the computer was shut down in boot
mode, not in Hibernation or Sleep mode.
6-14
SECURE
SECURE
Supervisor password
Power and Power-Up Modes
User Password
Satellite M100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite m100 series

Table of Contents