Hotkeys - Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz User Manual

Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key.

Hotkeys

Fn + ESC
Fn + F1
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Default resolution for simultaneous mode is set to WXGA (1280x800). If you
connect an RGB (Monitor) that is not WXGA resolution, change it in "Display
Properties".
Fn + F6
Fn + F7
Fn + F8
Fn + F9
Fn + F10
Fn + F11
Fn + F12
Fn + Space
Satellite M100
Mute Turns the volume on and off.
Lock Enters "Lock computer" mode. To restore
your desktop, you need to log on again.
Power Plan Mode Displays the power save
modes and lets you change the power settings
Sleep This hot key switches the system to Sleep
mode.
Hibernate This hot key switches the system to
Hibernate mode.
Output Changes displays.
Brightness (decreases)
Brightness (increases)
Wireless Pressing this hot key allows you to
switch between active wireless devices if the
wireless communication switch is switched on.
TouchPad
Cursor Keypad On/Off This hot key enables/
disables the embedded cursor keypad. See
chapter 3 for more information.
Numeric Keypad On/Off This hot key enables/
disables the embedded numeric keypad. See
chapter 3 for more information.
Scroll Lock On/Off
Change Resolution Each time when you press
the these hot keys, the resolution will change
depending on the specification of the LCD display
panel-with a WXGA/WXGA+ system. You can
change the resolution between 800 x 600 pixels
and 1280 x 800/1440 x 900 pixels.
The Keyboard
5-3