Installing The Display Assembly - Dell Vostro V131 Owner's Manual

Installing The Display Assembly

1. Align the display assembly to the computer base.
2. Tighten the screw to secure the right hinge in place.
3. Tighten the screws to secure the display assembly to the bottom base
chassis.
4. Connect the display cable to the connector on the system board.
5. Route the WLAN and WWAN antenna cables along their routing channels
and connect them to their respective modules.
palm rest .
6. Install the
hard drive .
7. Install the
keyboard .
8. Install the
base cover .
9. Install the
battery .
10. Install the
11. Follow the procedures in
After Working Inside Your Computer .
35