Installing The DC-In Port
1.
Replace the DC-in port into its compartment.
2.
Tighten the single screw to secure the DC-in port in place.
3.
Connect the DC-in cable to the system board.
display assembly .
4.
Install the
Wireless Wide Area Network (WWAN) card .
5.
Install the
Wireless Local Area Network (WLAN) card .
6.
Install the
palm rest .
7.
Install the
memory .
8.
Install the
hard drive .
9.
Install the
keyboard .
10. Install the
base cover .
11. Install the
Secure Digital (SD) card .
12. Install the
Subscriber Identity Module (SIM) card .
13. Install the
battery .
14. Install the
15. Follow the procedures in
After Working Inside Your Computer .
69