Removing The Processor Module - Dell Vostro 1014 Service Manual

Back to Contents Page
Processor Module
Dell™ Vostro™ 1014/1015 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Processor Module

1. Follow the procedures in Before Working Inside Your
2. Remove the ExpressCard.
3. Remove the memory card (if applicable).
4. Remove the battery.
5. Remove the access panel.
6. Remove the hard drive.
7. Remove the memory modules.
8. Remove the WLAN card.
9. Remove the control panel cover.
10. Remove the keyboard.
11. Remove the display assembly.
12. Remove the palm rest.
13. Remove the processor fan.
14. Remove the I/O board.
15. Remove the Bluetooth wireless
16. Remove the system board.
17. Remove the heat sink.
18. Set aside the computer chassis and place the system board on a clean, dry surface.
19. Use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
Computer.
card.