Back to Contents Page
I/O Board
Dell™ Vostro™ 1014/1015 Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the I/O Board
1. Follow the procedures in
Before Working Inside Your
2. Remove the battery.
3. Remove the
access
panel.
4. Remove the
hard
drive.
5. Remove the
WLAN
card.
6. Remove the
control panel
cover.
7. Remove the keyboard.
8. Remove the
display
assembly.
9. Remove the
palm
rest.
10. Remove the two screws that secure the I/O board to the computer chassis.
Computer.