Advertisement
Amulet High Definition Television Receiver User's Guide
1. Acquire the required cable. Component cable comes packaged with the Amulet. HDMI cable is not
packaged with the Amulet. Before purchasing the cable, consult your TV owner's manual to confirm
that your TV supports the video signal output that you plan to use.
2. Connect the video and audio cables to the Amulet. (HDMI does not require separate audio cable
connection.)
3. Connect the opposite end of the video and audio cables to the matching input in the TV.
4. Plug in your TV and turn on the power using your TV remote control. Use your TV remote control to
select the respective video input that has connected to the Amulet. Consult your TV owner's manual for
instructions as required.
5. Plug in your Amulet and turn on the power.
6. You should now see the output from the Amulet on your TV screen.
Figure 4-4 Connecting TV using Component and Composite Audio
Copyright © © © © 2007 Entone, Inc. All rights reserved
.
Advertisement
