Table of Contents
Advertisement
FDIS 11210 AQUARIUS
GB
English
Operating instructions
DISHWASHER - Contents
Operating instructions,1
Product Data, 3
Installation, 4-5-6
Loading the racks, 9-10
Wash cycles, 12
Troubleshooting, 14
Advertisement
Table of Contents
Related Manuals for Hotpoint FDIS 11210 AQUARIUS
Summary of Contents for Hotpoint FDIS 11210 AQUARIUS
-
Page 1: Table Of Contents
FDIS 11210 AQUARIUS English Operating instructions DISHWASHER - Contents Operating instructions,1 Precautions and advice, 2-3 Product Data, 3 Installation, 4-5-6 Description of the appliance, 7 Refined salt and rinse aid, 8 Loading the racks, 9-10 Detergent and dishwasher use, 11... -
Page 2: Precautions And Advice
Precautions and advice • The water supply tap must be shut off and the plug should be removed from This appliance was designed and the electrical socket at the end of every manufactured in compliance with international cycle and before cleaning the appliance safety standards. -
Page 3: Product Data
The Delayed Start option can help you organise the wash cycles accordingly (see Special wash cycles and options, if available). Product Data (product fiche) Product Fiche HOTPOINT Brand FDIS 11210 Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) 1.04... -
Page 4: Positioning And Levelling
Installation in the Technical Data table - otherwise the dishwasher may If the appliance must be moved at any time, keep it in an be function properly. upright position; if absolutely necessary, it may be tilted onto its back. Make sure the hose is not bent, compressed or kinked. Positioning and levelling DO NOT overtighten the hose connector, hand tight is sufficient. -
Page 5: Installation, 4
Electrical connection Changing the Mains Lead A lead can be ordered from Hotpoint Service: Before inserting the plug into the electrical socket, make sure that: - If you have damaged the existing lead or require a longer one • The socket is earthed and complies with current a charge will be made. -
Page 6: Installation, 4
(depending on the The machine has a buzzer/set of tones Technical data dishwasher model ) to inform the user that a command has width 60 cm been implemented: power on, cycle end etc. Dimensions height 85 cm depth 60 cm The symbols/indicator lights/LEDs on the control panel/ display may vary in colour and may have a flashing or fixed Capacity... -
Page 7: Description Of The Appliance
Description of the appliance Overall view Upper rack Upper spray arm Tip-up dispensers Rack height adjuster Lower rack Lower spray arm Washing filter Salt dispenser Detergent and rinse-aid dispensers Data plate Control panel Control panel Low Salt indicator light Start/Pause On-Off/Reset Cycle selection knob button and... -
Page 8: Refined Salt And Rinse Aid
Refined Salt and Rinse Aid Average autonomy Only use products which have been specifically designed Water Hardness Table salt dispenser with 1 for dishwashers. Do not use table salt or industrial salt. wash cycle per day Follow the instructions given on the packaging. level °dH °fH... -
Page 9: Loading The Racks
Loading the racks Tips Several dishwasher models are fitted with tip-up sectors Before loading the racks, remove all food residues from the They can be used in a vertical position when arranging dishes crockery and empty liquids from glasses and containers. No or in a horizontal position (lower) to load pans and salad bowls preventive rinsing is needed under running water. - Page 10 The upper rack can be adjusted for height based on requirements: Tip-up compartments with adjustable position high position to place bulky crockery in the lower rack and low The side tip-up compartments can be positioned at three different position to make the most of the tip-up compartments/sectors heights to optimize the arrangement of crockery inside the rack.
-
Page 11: Detergent And Dishwasher Use
Detergent and dishwasher use Measuring out the detergent Starting the dishwasher Good washing results also depend on the correct amount of 1. Turn the water tap on. detergent being used. Exceeding the stated amount does not 2. Press the ON/OFF button: all the indicator lights on the control result in a more effective wash and increases environmental panel will light up for a few seconds. -
Page 12: Wash Cycles
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Approximate Wash cycle Water... -
Page 13: Care And Maintenance
Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They must be cleaned if you wish to achieve the best results in •... -
Page 14: Troubleshooting
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. or cannot be controlled. •... -
Page 15: Product Guarantee And Repair Information
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to hel- ping the environment, Hotpoint reserves the right to 12 Months Parts and Labour Guarantee use quality, recycled components to keep down cu- Your appliance has the benefit of our manufacturer’s... - Page 16 195125077.02 - NC 02/2015 pb - Xerox Fabriano Indesit Company Spa Viale Aristide Merloni 47 60044 Fabriano (AN) www.hotpoint.co.uk Italy...
Need help?
Do you have a question about the FDIS 11210 AQUARIUS and is the answer not in the manual?
Questions and answers