DISHWASHER Contents Installation, Description of the appliance, 6 Loading the racks, 7 Start-up and use, 8 FDM 554 Wash cycles, 9 Rinse aid and refined salt, 10 Care and maintenance, 11 Precautions and advice, 12-13 Troubleshooting, After Sales Service, 15...
Installation Advice regarding the first wash cycle see chapter entitled Rinse aid and refined salt see chapter entitled Rinse aid and refined salt Positioning and levelling Technical data width 60 cm Dimensions height 85 cm depth 60 cm Capacity 14 standard place-settings see the Water supply 0,05 ÷...
Page 3
Electrical Connection Description of the appliance Assistance...
Page 4
Connecting the water supplies see figure Assistance Installation...
Description of the appliance Overall view Control panel WASH CYCLE Washing Low salt ON/OFF SELECT knob indicator light indicator light indicator light Drying indicator light Low rinse aid Start/Pause ON/OFF/RESET indicator light indicator light button and button indicator light Only in completely built-in models. Only available in selected models The number and type of wash cycles and options may vary depending on the dishwasher model.
Loading the racks Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. - The tilt feature can be used to increase the space in the After loading the appliance, check that the sprayer arms upper rack, to position wine glasses with different stem can rotate freely.
Start-up and use Starting the dishwasher Measuring out the detergent 1. Turn the water tap on. 2. Press the ON/OFF button: all the indicator lights on the control panel will light up for a few seconds. 3. Open the door and pour in a suitable amount of detergent (see below).
Wash cycles Detergent Wash Wash cycle (A) = compartment A cycles duration Wash cycle selection Wash cycle (B) = compartment B which (tolerance instructions include ±10%) Powder Liquid Tablets drying Hrs. Min. Heavily soiled dishes and pans (not to be used for 2:15’...
Rinse aid and refined salt - Press the ON/OFF button; the wash cycle phase indicator lights will flash. It is now possible to select the water hardness level. There is a water hardness level for every wash cycle: E.g.: wash cycle 1, water hardness level 1 wash cycle 2, water hardness level 2, etc.
Care and maintenance Clean the water inlet filter at the tap outlet regularly. - Turn off the water tap. - Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water. - Replace the filter and screw the water hose back into position.
Precautions and advice Disposal of old electrical appliances General safety Saving energy and respecting the environment see Wash Cycles Wash cycle table see Start-up and use see Start-up and use Only available in selected models.
Troubleshooting Problem: Possible causes / Solutions: The dishwasher does not start. • T h e p l u g h a s n o t b e e n i n s e r t e d i n t o t h e e l e c t r i c a l s o c k e t p r o p e r l y , o r t h e r e i s n o p o w e r i n t h e h o u s e .
Need help?
Do you have a question about the FDM 554 and is the answer not in the manual?
Questions and answers