Table of Contents
Advertisement
SEWING
MACHINE
DIV.20
MODEL
385. 17822490
THREADING OF MACHINE
THE NUMBERED STEPSBELOW FOLLOW THE NUMBERS ON THE ILLUSTRATIONS.
DOTrED LINES SHOW PLACES WHERE LOOPS AND THEN ISPULLED TIGHT.
RAISE THE TAKE-UP LEVER TO ITS HIGHEST POSITION BY TURNING THE HAND WHEEL
TOWARD YOU.
RAISE THE PRESSER FOOT LEVER.
PLACE SPOOL ON PIN WITH THREAD COMING
FROM THE BACK OF THE SPOOL.
1.
DRAW THREAD THROUGH THE THREAD GUIDE.
2.
HOLDING THREAD TAUT WITH RIGHT HAND, DRAW THREAD DOWN INTO THE TENSION
AREA AND THEN AROUND THE CHECK SPRING HOLDER.
3.
FIRMLY DRAW THREAD UP AND THROUGH THE TAKE-UP LEVER FROM RIGHT TO LEFT.
4.
PULL THE THREAD TO THE LEFTAND SLIP IT INTO THE NEEDLE BAR THREAD GUIDE.
5.
HTREAD NEEDLE FROM FRONT TO BACK.
NOTE:
YOU MAY WANT TO CUT THE END OF THREAD WITH SHARP SCISSORS FOR
EASIER NEEDLE THREADING.
J
5
Hide quick links:
Advertisement
Table of Contents
