Xm Audio Page - Garmin GPSMAP 496 Owner's Manual

Garmin owner's manual portable aviation receiver gpsmap 496
Hide thumbs Also See for GPSMAP 496:
Table of Contents

Advertisement

XM Audio Page

Use the XM Audio Page to view and select XM Radio channels, add
channels to or remove channels from the Favorites category, and
turn XM audio output on or off.
notE: You MUSt have a GXM 30A or GXM 30 smart
antenna connected to your GPSMAP 496 and a subscription to
XM Radio to use XM Radio features. Additionally, you must
use an optional external speaker with vehicle power cable,
third-party FM modulator, headphones, or another audio device
plugged in to hear the audio.
Category name
Channels
Artst name
Song title
Channel
number
XM Audio Page
The XM Audio page is available in Aviation, Marine, and
Automotive Modes, but it is not shown by default in any mode.
However, the XM tab always appears on the Main Menu, even if the
XM Audio Page is turned off.
GPSMAP 496 Owner's Manual
The XM Audio Page is divided into three panes. The first pane
contains a list of XM Radio categories into which XM Radio
channels are grouped (Classical, Decades, Traffic, and so on). For
a complete list of available categories and channels, visit the XM
Radio Web site at www.xmradio.com. Select All Channels to view
a list of all channels in numerical order. You can also view a list of
your favorite channels.
The middle pane shows a list of channels in the selected category.
Each channel has a description and the artist currently playing. You
can adjust this setting to show the song title instead of the artist. The
bottom pane shows the song and artist or program name, the channel
number and name, and the strength of the XM Radio signal.
Turning on the XM Audio Page
The XM Audio Page is off by default.
Channel
name
To show the XM Audio Page:
1. Press MENU twice to show the Main Menu.
Signal
strength
2. Use the ROCKER to highlight the Display tab.
ndcator
3. Highlight the XM Audio Page field, and press ENTER.
4. Select On, and press ENTER.
notE: Audio interference can occur while using some aviation
audio panels and FM Modulators. Use of a Ground Loop Isolator
can eliminate this interference.
Aviation Mode Pages >
XM Audio Page
5

Advertisement

Table of Contents
loading

Table of Contents