Filling The Water Reservoir; Switching On The Machine - Philips HD7827 User Manual

Filling the water reservoir

1 Fill the water reservoir with cold water up to
the MaX indication and put it back onto the
machine.
Never pour milk, coffee, hot water or carbonated
water into the water reservoir.
The MIN indication on the water reservoir
indicated the minimum amount of water required
for brewing coffee. Always fill the water reservoir
beyond the MIN level.

Switching on the machine

1 Put the plug in an earthed wall socket.
2 Press the on/off button 3.
, The light ring flashes slowly while the water
heats up. Heating up takes approx. 75 seconds.
, The coffee machine is ready for use when
the light ring lights up continuously.
Note: If the light ring flashes rapidly, the water reservoir
does not contain enough water for brewing one cup of
coffee.
Placing a pod holder
1 Release the lid by moving the lever upwards.
, The lid opens automatically.
2 Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in
the centre is not clogged, e.g. with loose coffee grounds.
EnglisH
15