Philips HD7827 User Manual page 13

4 Place a bowl with a capacity of at least
1.5 litres on the cup tray.
5 Make sure a pod holder, without pod or pods,
is in place.
6 Put the plug in an earthed wall socket.
7 Press the on/off button 3.
The light ring around the on/off button lights up to
indicate that you have to flush the machine.
8 To start flushing, press the 1-cup button q and
the 2-cup button qq briefly at the same time.
Never interrupt the flushing cycle halfway. If you
do, the boiler does not fill itself properly.
, The light ring around the on/off button starts
flashing to indicate that the flushing cycle has
started. The flushing cycle takes approx. 1.5 to
2.5 minutes.
, During the flushing cycle, the boiler fills itself
with water from the water reservoir and cold
water comes out of the coffee spout. During the
flushing cycle, the machine produces more noise
than during a regular brewing cycle.
EnglisH
13