Belkin PM01218ea User Manual page 66

TRoUblesHooTInG
sections
table of contents
Problem:
My wireless PC cannot connect to the Router
solution:
1 Make sure the wireless PC has the same SSID settings as the
Router, and you have the same security settings on the clients
such as WPA or WEP encryption
2 Make sure the distance between the Router and wireless PC are
not too far away
Problem:
The wireless network is often interrupted
solution:
1 Move your wireless PC closer to the Router to find a better signal
2 There may also be interference, possibly caused by a microwave
oven or 24GHz cordless phones Change the location of the
Router or use a different wireless channel
G Wireless Modem Router
1 2 3 4 5 6
Problem:
I can't connect to the Internet wirelessly
solution:
If you are unable to connect to the Internet from a wireless computer,
please check the following items:
1 Look at the lights on your Router If you're using a Belkin Router,
the lights should be as follows:
• The "Power" light should be on.
• The "Connected" light should be on, and not blinking.
• The "WAN" light should be either on or blinking.
2 Open your wireless utility software by clicking on the icon in the
system tray at the bottom right-hand corner of the screen If you're
using a Belkin Wireless Card, the tray icon should look like this (the
icon may be red or green):
3
The exact window that opens will vary depending on the model of
wireless card you have; however, any of the utilities should have
a list of "Available Networks"—those wireless networks it can
connect to
does the name of your wireless network appear in the results?
Yes, my network name is listed—go to the troubleshooting solution
titled "I can't connect to the Internet wirelessly, but my network name
is listed"
no, my network name is not listed—go to the troubleshooting solution
titled "I can't connect to the Internet wirelessly, and my network name is
not listed"
64
7 8 9 10