Table of Contents
Advertisement
ManUallY ConfIGURInG neTWoRK adaPTeRs
sections
table of contents
Windows 98se or Me
1
Right-click on "My Network Neighborhood" and select "Properties"
from the drop-down menu
2
Select "TCP/IP -> settings"
for your installed network
adapter You will see the
following window
G Wireless Modem Router
1
2
3
(1)
(2)
(3)
4
5
6
3
If "Specify an IP address"
is selected, your Router will
need to be set up for a static
IP connection type Write
the address information
in the table below You
will need to enter this
information into the Router
4
Write down the IP address and subnet mask from the "IP
Address" tab (3)
5
Click the "Gateway" tab (2) Write down the gateway address in
the chart
6
Click the "DNS Configuration" tab (1) Write down the DNS
address(es) in the chart
7
If not already selected, select "Obtain an IP address automatically"
on the "IP Address" tab Click "OK" Restart the computer When
the computer restarts, your network adapter(s) are now configured
for use with the Router Set up the computer that is connected to
the cable or DSL modem by FIRST using these steps You can also
use these steps to add computers to your Router after the Router
has been set up to connect to the Internet
57
7
8
9
10
Hide quick links:
Advertisement
Table of Contents
