Time Format; Backlight Timer - Garmin GPS 12CX Owner's Manual

REFERENCE
Main Menu—
System Setup
Submenu
Entering a Time Offset
Selecting a Time Format
Backlight Timer Settings
Tone Settings
38
Date and Time Setup (cont)
To enter the time offset:
1. Highlight the 'OFFSET' field and press ENTER .
2. Enter the time offset, and press ENTER.

Time Format

The time display shown on the system setup and Po-
sition Pages may be set to display the time in a 12 or 24-
hour format.
To select the time format:
1. Highlight the 'HOURS' field and press ENTER.
2. Select the 12 or 24 hour format and press ENTER.

Backlight Timer

The screen backlight timer is adjustable for 0, 15, 30,
60, 120, or 240 seconds. If the timer is set to '0' then the
backlight will operate continuously after being activated.
When the backlight is activated a bulb icon will appear
on the satellite status page.
To set the backlight timer:
1. Highlight the 'LIGHT' field and press ENTER .
2. Select the desired setting and press ENTER .
3. To turn the backlight on and off, press the POWER
key briefly.
Tone Setting
The GPS 12 CX allows you to choose a tone for mes-
sages only, messages and keystrokes, or no tone at all.
To set the tone:
1. Highlight the 'TONE' field and press ENTER .
2. Select the desired tone setting and press ENTER.