Table of Contents
Advertisement
Navigation Simulator
The GPS 12CX's simulator mode lets you practice
all aspects of its operation without active satellite ac-
quisition. You can plan and practice trips, enter new
waypoints and routes, and save them for use during
normal operation.
To activate the simulator:
1. From the Setup Menu Page, highlight 'SYSTEM', and
press ENTER .
2. Highlight the 'MODE' field, and press ENTER .
3. Select 'Simulator?', and press ENTER .
Once the simulator mode has been activated, use
the Position, Compass, or Highway Page to set your
speed and track by highlighting the appropriate field,
entering the desired value, and pressing ENTER . You
may also enter a new position if you desire (from the
Position Page).
The GPS 12CX does not track satellites in
simulator mode. Never attempt to use the
simulator mode for actual navigation.
REFERENCE
Navigation
Simulator
Putting the GPS 12CX in
Putting the GPS 12CX in
Putting the GPS 12CX in
Putting the GPS 12CX in
Putting the GPS 12CX in
Simulator Mode
Simulator Mode
Simulator Mode
Simulator Mode
Simulator Mode
Enter Simulator Speed, Track
Enter Simulator Speed, Track
Enter Simulator Speed, Track
Enter Simulator Speed, Track
Enter Simulator Speed, Track
and Bearing in the appropriate
and Bearing in the appropriate
and Bearing in the appropriate
and Bearing in the appropriate
and Bearing in the appropriate
field.
field.
field.
field.
field.
45
Hide quick links:
Advertisement
Table of Contents
