Route Catalog - Garmin Personal Navigator GPS 100AVD Owner's Manual

7.2 ROUTE CATALOG

Route Number
The waypoints of an existing route may be copied to an empty route using
the Route Catalog Page. This is useful if you wish to store the contents of
route 0 before activating a new route. Also, you may copy a route and then
make changes to form a new route.
To copy a route...
· Enter the number of the route you wish to copy in the "copy from" field
(this field defaults to "0").
· Enter the number of the route you wish to copy to in the "copy to" field.
The Route Catalog Page gives a list of the routes stored in the GPS 100. This
page shows the route number, first/last waypoint names composing the
route, and the total distance traversed by the route. For example, in the
illustration above, route 1 begins at KSEA (Seattle-Tacoma International),
ends at KJFK (John F. Kennedy International), and is 2182 nautical miles
long.
Up to two routes are displayed on the Route Catalog Page. Additional routes
may be displayed by scrolling.
To scroll the Route Catalog Page...
· Place the cursor over the route on line 3 and press the right arrow key
to scroll down the list.
· Place the cursor over the route on line 2 and press the left arrow key
to scroll up the list.
Copy From
First & Last Waypoint of Route
ROUTE CATALOG PAGE
Copy To
Total Distance
7-3