Garmin Personal Navigator GPS 100AVD Owner's Manual page 104

· Press the MSG key. The Message Page will be displayed as
illustrated below.
The GPS 100 is warning you that it is in the SIMULATOR mode and should
not be used for actual navigation. Press the MSG key to return to the GPS
Status Page.
We will now take you through the process of creating a waypoint used in the
sample trip. We will create a waypoint name DRYTG representing the Dry
Tortugas area of the Gulf of Mexico.
Create waypoint DRYTG...
· Press the WPT key until the Waypoint Definition Page is displayed as
illustrated below.
· Press the right or left arrow key to place the cursor over the waypoint
name field as illustrated below.
· Enter the waypoint name DRYTG. Begin by pressing the 2 key (which
also has a "D" printed on it). Then press the right or left arrow key until
"D" is displayed. Press the 6 key (which also has an "R" printed on it)
followed by the right or left arrow key until "R" is displayed. Continue
entering the rest of the letters of DRYTG using the same method.
When finished, press the ENT key. The New Waypoint Page will
15-4