Attaching The Port Replicator - Fujitsu LifeBook U772 User Manual

USB 3.0 Ports (Qty. 4)
Universal Serial Bus (USB) 3.0 ports allow you to connect USB devices. USB 3.0 ports are backward-compatible with
USB 2.0 and 1.1 devices.
External VGA Port
The external VGA port lets you connect an external monitor or projector. Note that if a Port Replicator is attached, you
must use the external VGA port on the Port Replicator, not the one on your system.
LAN (RJ-45) Jack
The LAN jack allows you to connect a LAN to the Port Replicator. Note that when the system is attached to the Port
Replicator, the LAN Jack on the Port Replicator should be used, not the one on the system.
Security Lock Slots
The security lock slots allow you to attach an optional physical lock down device.
DC Power Jack
The DC power jack allows you to plug in the AC adapter to power your Ultrabook and charge the internal battery.

Attaching the Port Replicator

To attach the Port Replicator, set the Ultrabook flush
against the vertical guides and align the Port Replicator
connector on the bottom of your Ultrabook with the
connector on the Port Replicator and push the corners
down simultaneously. (Figure 30)
When your system is connected to the port replicator, it
is possible to use up to three displays simultaneously.
For related information, go to "Using Multiple Displays
Simultaneously" on page 37
.
57 - Port Replicator
Docking Connector
Figure 30. Attaching the Port Replicator