Troubleshooting - Fujitsu LifeBook U772 User Manual

The first option, Automatically log on to OmniPass as the current user, will do just as it says; during Windows login,
you will be logged on to OmniPass using your Windows login credentials. If the user logging into Windows was never
enrolled into OmniPass, upon login no one will be logged on to OmniPass. This setting is appropriate for an office
setting or any setting where users must enter a username and password to log into a computer. This is the default
setting.
With the second option, Manually log on to OmniPass at startup, OmniPass will prompt you to login once you have
logged on to Windows.
With the third option, Do not log on to OmniPass at startup, OmniPass will not prompt for a user to be logged on.
You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking Log in User from the
right-click menu.

Troubleshooting

You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need
administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the
same username and password
Cannot add Windows users to OmniPass
If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local security settings.
You can do this by going to Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local
Policies, expand Security Options, and double-click Network Access: Sharing and Security Model for Local
Classic - Local Users Authenticate as Themselves
Accounts. The correct setting should be .
Cannot add a User with a Blank Password to OmniPas
If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust your local
Cannot add Windows user to OmniPass
security settings. First attempt the procedure explained in the section. If the
difficulties persist, then try the following procedure.
Click Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies, expand
Security Options, and double-click Accounts: Limit local account use of blank passwords to console login only.
This setting should be set to Disabled.
142 - Introducing the Optional Fingerprint Sensor Device