Shutdown And Startup Problems - Fujitsu LifeBook T732 User Manual

Tablet pc
Hide thumbs Also See for LifeBook T732:
Table of Contents

Advertisement

Available languages

Available languages

Problem
Your LIFEBOOK Tablet PC
will not work on battery
alone. (continued)
The battery seems to
discharge too quickly.

Shutdown and Startup Problems

The Suspend/Resume but-
ton does not work.
The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.
Possible Cause
Your installed battery is faulty.
You re running an application
that uses a lot of power due to
frequent hard drive, optical
drive, or Wireless LAN use.
The power savings features
may be disabled.
The brightness is turned all the
way up.
The battery is very old.
Battery was exposed to high
temperatures.
The battery is too hot or too
cold.
Suspend/Resume button is
disabled.
There may be application soft-
ware. conflict
The boot sequence settings of
the setup utility are not com-
patible with your configura-
tion.
Internal hard drive was
not detected.
Possible Solutions
Verify the condition of the battery using the Status Indicator panel and replace or
See "Status Indicator Panel" on page 20.
remove any shorted battery.
Use both the primary battery and an optional second battery and/or use a power
adapter for this application when at all possible.
Check the Power Options menu settings and adjust according to your operating needs.
Turn down the brightness adjustment. The higher the brightness the more power your
display uses.
Replace the battery.
Replace the battery.
Restore the Tablet PC to normal operating temperature. Charging icon on the Status
Indicator panel will flash when battery is outside of operating range.
Select the "Choose what the power button does" option.
Close all applications and try the button again.
Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen
or use the [F2] key and enter the setup utility and adjust the source settings from the
See "BIOS Setup Utility" on page 38.
Boot menu.
Use the BIOS setup utility or Primary Master submenu, located within the Main menu,
to try to auto detect the internal hard drive.
98 - Troubleshooting

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents