Enabling/Disabling Ambient Light Sensor - Fujitsu LifeBook T732 User Manual

Using Power Management to Adjust Brightness
Click Start -> Control Panel. In View by:, select one of the icon views. Select Display, then click Adjust brightness in
the left pane. Under Select a power plan, select the plan settings you want to use. Drag Screen brightness: bar to
the left or right, depending on your preference.
Using the PC Settings Window (Windows 8)
To change the brightness using the PC Settings window, click at the bottom right corner of the screen so that vertical menu
appears, then click the Settings icon. Click the Brightness icon and drag the brightness bar up to increase the brightness,
or down to decrease it.
Using the Fujitsu Menu to Adjust Brightness
To adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system tray in the lower right corner
of the screen. Double-click Windows Mobility Center, then double-click the icon adjacent to Display brightness. Set
the screen brightness sliders for On battery and Plugged in scenarios.
I AC
F USING
BRIGHTNESS SETTING IS SET TO APPROXIMATELY MID
T
HE HIGHER THE BRIGHTNESS
DISCHARGE

Enabling/Disabling Ambient Light Sensor

The system has an ambient light sensor (just below the Power/Suspend/Resume switch) that automatically senses
the light conditions in which the computer is operating. If the lighting is very bright, the brightness of the LCD will
increase to make it easier to see the display. Conversely, if it is used in a darkened room, the display will automatically
dim.
N
OTE THAT WHEN YOU FIRST START YOUR SYSTEM
FOLLOWING STEPS
The light sensor can be enabled or disabled from the Control Panel as follows:
Open the system Control Panel and click in the View by: field, select either large or small icons.
1
,
POWER YOUR BRIGHTNESS SETTING IS SET TO ITS HIGHEST LEVEL BY DEFAULT
,
THE MORE POWER THE SYSTEM WILL CONSUME AND THE FASTER YOUR BATTERIES WILL
. F ,
OR MAXIMUM BATTERY LIFE SET THE BRIGHTNESS AS LOW AS POSSIBLE
.
- .
LEVEL BY DEFAULT
,
THE AMBIENT LIGHT SENSOR IS DISABLED
36 -
. I ,
F USING BATTERY POWER
.
. Y
OU WILL INITIALLY NEED TO ENABLE IT USING THE
YOUR