Shutdown And Startup Problems; Video Problems - Fujitsu LifeBook Stylistic Q550 User Manual

Problem

Shutdown and Startup Problems

The Suspend/Resume 
switch does not work.
The system powers up
and displays power on
information, but fails to
load the operating system.
An error message is dis-
played on the screen dur-
ing the boot sequence.
Your Tablet PC appears to
change setup parameters
when you start it.

Video Problems

The display is blank when
you turn on your Tablet
PC.
Possible Cause
Suspend/Resume 
switch is disabled.
There may be application
software. conflict
You have a secured system
requiring a password to load
your operating system.
The boot sequence settings
of the setup utility are not
compatible with your configu-
ration.
Hard drive was not detected.
Power On Self Test (POST)
has detected a problem.
BIOS setup changes were not
saved when made and you
exited the setup utility.
Power management timeouts
are set for short intervals and
you didn't see the display go
on and off again.
60 - Troubleshooting
Possible Solutions
To enable the button, go to Control Panel -> Power Options
and click on the Advanced tab. In the Power buttons area,
select the "Change what the power button does" option.
Close all applications and try the button again.
Make sure you have the right password. Enter the setup util-
ity and verify the Security settings and modify them as
accordingly. See "BIOS Setup Utility" on page 37.
Set the operating source by pressing the [F12] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu. See "BIOS Setup Utility" on page 37.
Use BIOS setup utility to auto detect the internal hard drive.
See the Power On Self Test (POST) messages to determine
the meaning and severity of the problem. Not all messages
are errors; some are simply status indicators. See "Power On
Self Test Messages" on page 62.
Make sure you select Save Changes And Exit when exiting
the BIOS setup utility.
Move the mouse to restore operation. If that fails, push the
Power/Suspend/Resume switch. (The display may be shut
off by Sleep mode, Auto Suspend or Video Timeout)