Turning On The Foretrex 201 - Garmin Foretrex 201 Owner's Manual

Overview
Getting Started
6

Turning on the Foretrex 201

After the Foretrex 201 is completely charged, it is ready for use. Allow the Foretrex 201
time to track satellites and determine your position the first time you use it. Upon startup,
the GPS signal bar appears. As the Foretrex 201 locates more satellites and the signal
strength increases, the bar moves to the right. Estimated GPS accuracy displays underneath
the GPS signal bar. Turn to page 5 to learn how to recharge the Foretrex 201.
To turn on the Foretrex 201:
1. Press and hold the POWER
2. Your Foretrex 201 automatically begins acquiring satellites. The GPS Signal Bar and
accuracy field are shown on the Satellite Page as well as an image that is acquiring
satellites. The satellite dish icon on the left side of the screen flashes while the Foretrex
201 determines your location.
3. Leave the Foretrex 201 with a clear view of the sky for 15–30 minutes initially. After
the first use, it should only take less than a couple minutes to acquire satellites.
4. When the Foretrex 201 acquires enough satellite signals to determine your location, the
satellite dish icon on the left side of the screen stops flashing.
NOTE: If you have moved over 500 miles from the location you last used your
Foretrex 201 unit, or you have not used your Foretrex 201 in more than one
month, it may take 15 to 30 minutes to determine your location.
button until the Satellite Page is displayed, then release.