Olivetti d-Copia 200D Operation Manual page 73

Bit depth
Sensor
Scanning speed
Memory
Power supply
Power consumption
Width
Overall
dimensions
Depth
Weight
8
(Approximately) *
Width
Unit
Depth
dimensions
Height
Operating conditions
Emulation
Interface port
Noise level
Emission concentration
(measurement according
to RAL-UZ 62: Edition
Jan. 2002)
*1 When standard A4 paper is used under the operating conditions.
*2 Feed paper lengthwise only.
*3 Leading and trailing edges.
*4 Along the other edges in totals.
*5 When making multiple duplex copies, the copy speed will vary based on the environment conditions.
*6 Print speed during printing of the second sheet and following sheets when using A4 plain
paper in the tray 1 and performing continuous one-sided printing of the same page.
*7 The first-copy time is measured after the power save indicator turns off following power on,
using the document glass with the polygon rotating in the copy ready state and "Selection of
copy start state" set to ON in the user programs (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
*8 Not including toner/developper and drum cartridges.
As a part of our policy of continuous improvement, OLIVETTI reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some
deviations from these values in individual units.
d-Copia 200D
1 bit or 8 bit/pixel
Color CCD
Max. 2.88ms/line
16 MB
±
Local voltage 10% (For this copier's power supply requirement, see
the name plate located on the back of the unit.)
Max. 1.0kW
607.6mm
462.5mm
16.0kg
518.0mm
462.5mm
295.6mm
Temperature: 10°C to 30°C
Humidity: 20% to 85%
GDI
USB interface (USB 2.0 Full
Speed)
Sound power level
LwA
Copying mode: 6.4B
Standby mode: 3.3B
Sound pressure level
LpA
Copying mode: 48dB(A)
Standby mode: 17dB(A)
Sound pressure level
LpA
Copying mode: 52dB(A)
Standby mode: 17dB(A)
Noise emission measurement in accordance with ISO7779.
3
Ozone:0.02 mg/m or less
3
Dust:0.075 mg/m or less
3
Styrene:0.07 mg/m or less
d-Copia 201D
809mm
492.5mm
23.0kg
492.5mm
465.4mm
USB interface (USB 2.0 Full
Speed) / LAN (10 Base-T)
(reference) (Bystander positions)
(reference) (Operator position)
9
71