Table of Contents
Advertisement
Rear Panel
©
1. Cooling fan
,, The fan alwaysturnswhen the power b on.
Providea minimumof 6 inches (15 cm)of clear
spaceon all sidesof the fanwhen you installthe
product.
2. 2.0 OH Speaker Connector Terminals
The speakerconnector terminalsare locatedon the
rearof the system.
1. To achieve the correctsound quality, insertthe
speakerconnectorcables identifiedbelow into the
correctspeakerterminalson the back of the sys-
tem.
" Leftspeaker(markedL).
,, Rightspeaker(markedR).
3. ONLY FOR SERVICE
• This jack is for service only Please do not use.
4. AUX IN 2 Terminals
1. Use an Audio Cable (not supplied) to connect AUX IN
2 on the product to Audio Out on an external analog
component.
" Be sure to match connector colors.
,, If the external analog component has only one
Audio Out jack, connect to either the left or right
terminal.
Press the TUNER/AUX button to select the AUX 2
input.
When theunit is inAUXmode,if noneof the
buttonson thefront panelare pushedfor more
than8 hours,the powerwillautomatically t urn off.
5. FM Antenna Connector Terminal
1. Connectthe FMantenna(supplied) t o theFMAntenna
jack.
2. Slowlymovethe antennawireuntilyou find a location
wherereceptionis good,thenfastenit to a wallor
otherrigidsurface.
3. If reception is poor,you mayneedto install a n outdoor
antenna. T o do so,connectan outdoorFMantennato
FMantennajackon the rearof the systemusinga
750 coaxialcable(notsupplied).
6. LED Terminals for the Front Speakers
To enjoythe speciallighteffectof the speakers, c onnect
the LEDcabbs of the FrontSpeakers to the LED
terminalsof the system.
English
7
Advertisement
Table of Contents
