Table of Contents
Advertisement
Rear Panel
1
2
3
4
5
6
7
1. Cooling fan
• The fan always turns when the power is on.
Secure a minimum 10 cm of clear space from all
sides of the fan when installing the product.
2. 4.2 CH Speaker Connector Terminals
The speaker connector terminals are located on the
rear of the system.
1. To achieve the correct sound quality, insert the
speaker connector cables identified below into the
correct speaker terminals on the back of the sys-
tem.
• L eft speaker (marked L).
• R ight speaker (marked R).
3. ONLY FOR SERVICE
• T his jack is for service only. Please do not use.
4. AUX IN 2 Terminals
1. Use the Audio Cable (not supplied) to connect AUX IN
2 on the product to Audio Out on an external analog
component.
• B e sure to match connector colors.
• I f the external analog component has only one
Audio Out jack, connect to either the left or right
terminal.
• Press the TUNER/AUX button to select the AUX
2 input.
• When the unit is in AUX mode, if none of the
buttons on the front panel are pushed for more
than 8 hours, the power will automatically turn off.
5. FM/AM Antenna Connector Terminal
Plug t he connector on the FM/AM antenna (supplied)
into the FM/AM terminal on the rear of the system.
6. LED Terminals of the Front Speakers
Connect the LED cables of the Front Speakers to each
LED Terminals of the system. You can enjoy the special
light effect on your speakers.
7. Voltage Selector (Optional)
Check the position of the voltage selector on the
rear of the system(optional).
This product may not support the Voltage Selector
function depending on your region.
7
6
English
English
Advertisement
Table of Contents
