Using Extras; Finding A Place Using The Map; Entering Coordinates - Garmin BMW Motorrad Navigator IV Owner's Manual

3. Touch Where To? > Favorites
Panoramio Photos. Pictures with
™
location information are listed.
4. Touch a picture.

Using Extras

For information about extras such as safety
camera information and Garmin Travel
Guide, see pages 35–36.
Finding a Place Using the
Map
To find a location on the map, touch
To? > Browse Map or touch anywhere on
the map.
• Touch and drag to view different parts of
the map.
• Touch and to zoom in and out.
BMW Motorrad Navigator IV Owner's Manual
• Touch anywhere on the map. An arrow
>
points to the location.
Save
• Touch
go!
• Touch
• If the Navigator IV is in simulator mode,
touch Set Loc.
selected location. (See
• Touch to switch between a 3D
(three-dimensional) map and a 2D (two-
dimensional) map.
• Touch to rotate the viewing angle in
3D view.
Where
• As you zoom out, the map changes to
a digital elevation map showing the
contours of the area.
• Zoom far out to view a globe. Touch and
spin the globe to quickly find different
areas of the world.
noTe: You can only see detailed map
information for areas for which you have
maps loaded on your Navigator IV.
to save this location.
to navigate to the location.
to set your location to the
page 29.)

Entering Coordinates

If you know the geographic coordinates of
your destination, you can use your Navigator
IV to navigate to your destination using the
latitude and longitude coordinates (or other
coordinate formats). This can be especially
helpful when geocaching.
1. Touch Where To? > Coordinates.
2. Touch Format, and select the correct
coordinate format for the type of map you
are using.
3. Touch a direction field to select a new
direction.
4. Touch a numeric field to enter the
coordinates, and touch Done.
5. After you have entered the proper
coordinates, touch Next.
Where To?