Receiving A Call; In A Call; Phone Menu - Garmin BMW Motorrad Navigator IV Owner's Manual

Using Hands-free Calling
5. Select your phone, and touch OK.
6. Enter 1234 into your phone.
Pairing the Navigator IV with
Your Wireless Headset
To listen to high-quality audio, you can
connect an Advanced Audio Distribution
Profile (A2DP) Bluetooth headset.
When the Navigator IV is in the motorcyle
mount, the internal speaker will be disabled,
and you can only receive calls and listen to
voice prompts and MP3s through a wireless
headset/helmet. For more information, see
the audio options table on page
1. From the Menu page, touch
Settings > Bluetooth > Enabled.
2. Under Audio, touch Add.
3. Turn on your headset, and enable
Find Me/Discoverable/Visible mode, if
necessary.
4. Touch OK on the Navigator IV.
5. Select your headset, and touch OK.

6. Enter the Bluetooth PIN/passkey for your
headset, if necessary, and touch Done.
7. Touch OK.

Receiving a Call

When you receive a call, the Incoming Call
window appears. Touch
the call. Touch
silence the ring.
While the Navigator IV is in the motorcycle
mount, you can only receive a call through a
headset.
34.

In a Call

Tools > To end a call, touch
Call options
>
• Touch Tones—displays a keypad page so
you can use automated systems, such as
voice mail.
answer to answer
ignore to ignore the call and
end Call. Touch
>
for the following options:
• Transfer audio To Phone—this is
helpful if you want to turn off the
Navigator IV but stay on the call, or if
you need privacy. To switch back, touch
Transfer audio To Device.
• Mute Microphone.

Phone Menu

Phone
From the Menu page, touch
the Phone menu. Touch Status
signal strength, the battery level, and the
name of the connected phone.
noTe: Not all phones support all features
of the Navigator IV Phone menu.
BMW Motorrad Navigator IV Owner's Manual
to view
to view the