C
H A P T E R
This chapter shows you how to configure static routes for your NBG334S.
14.1 Static Route Overview
Each remote node specifies only the network to which the gateway is directly connected, and
the NBG334S has no knowledge of the networks beyond. For instance, the NBG334S knows
about network N2 in the following figure through remote node router R1. However, the
NBG334S is unable to route a packet to network N3 because it doesn't know that there is a
route through the same remote node router R1 (via gateway router R2). The static routes are
for you to tell the NBG334S about the networks beyond the remote nodes.
Figure 74 Example of Static Routing Topology
14.2 IP Static Route Screen
Click Management > Static Route to open the IP Static Route screen. The following screen
displays.
NBG334S User's Guide
Static Route Screens
14
139