Page 2
MORE INFORMATION For warranty and service information, please contact your local DV Mark distributor (contact information available at www.dvmark.it). For more technical information, please visit us at www.dvmark.it and fill out the form on the Contact Us page. We hope you enjoy your amplifier and use it to make great music! “The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 3
The second is flexibility. One example of this is DV Mark’s patent pending Continuous Power Control feature (included on our 40W heads and combos), which allows you to adjust the power incrementally, setting the power at anywhere between 1 and 40W. This means you can get the tone you want at the volume you need;...
8) PRESET The display shows the name and number of the selected PRESET. 9) SLOT Il Multiamp ha 7 SLOT dove poter inserire gli amp modelling e gli effetti e 1 SLOT dove inserire i vari tipi di cabinets. 9) SLOT The Multiamp features 7 SLOTs where you can put the AMP models and the effects, and 1 SLOT for the CAB models.
4 ohm. 29) BRIDGE This speakon out is used when using the Multiamp power amp in mono-bridge mode. Do not connect this output 29) BRIDGE Uscita speakon combo per collegamento in modalità mono. Non collegare questa uscita ad un carico con to a load of less than 8 ohms! impedenza inferiore a 8 ohm.
Page 6
For best results use our DV Mark Standard C412 Standard and C112 Small cabinets for LIVE option or our Markaudio Per una resa ottimale consigliamo i nostri cabinet DV Mark C412 Standard e C112 Small per i LIVE sound e le nostre P.A.
Page 7
The SLOTs are the locations where you can put the AMP models or effects.Each Multiamp PRESET contains 8 SLOTs. Gli SLOT sono locazioni dove poter inserire modelli di AMP o effetti. Ogni PRESET del MULTIAMP ne contiene 8. In You can create the signal routing by putting an AMP and the effects in these locations as you like and need.
Page 8
Selezionando le opzioni desiderate e’ possibile modificarle con il potenziometro VALUE. Multiamp state-of-the-art design allows for continual expansion and more and more useful and exciting tones and L’innovativo design del Multiamp consente una continua espansione di suoni ed effetti sempre più utili ed emozionanti effects.
Page 9
IMPOSTAZIONE MULTIAMP MULTIAMP OVERVIEW hOW TO CREATE A SOUND COME FARE UN SUONO Choose the connection mode (LIVE with mono cab or STEREO or P.A./studio). Scegliere il tipo di collegamento (LIVE con cassa mono o STEREO o P.A./studio). Set the input level pressing the PAD button and select the right dB value.
Page 10
Usare le uscite UNBALANCED OUT, o se collegato ad un mixer collegarsi alle uscite XLR BALANCED OUT. Connect the Multiamp INPUT to the SEND of your amp head and the Multiamp OUTPUT to the return of your head amp. Collegare IN del MULTIAMP a SEND della vostra testata e OUT del Multiamp a RETURN della testata.
Page 11
In questo menù è possibile effettuare le operazioni di configurazione dell’AMPLI interno: modalità STEREO o modalità MONO (BRIDGE). MIDI In the MIDI menu you can set the MIDI address of the Multiamp and the PATCH NUMBER to the Multiamp PRESET MIDI map.
POWER REQUIREMENT: 100V; 120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale). DV Mark amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to at country’s voltage.
Need help?
Do you have a question about the MULTIAMP and is the answer not in the manual?
Questions and answers