MORE INFORMATION For warranty and service information, please contact your local DV Mark distributor (contact information available at www.dvmark.it). For more technical information, please visit us at www.dvmark.it and ll out the form on the Support page. We hope you enjoy your power amp and use it to make great music! “The Lightning Flash with arrowhead symbol...
Page 3
The DV MARK EVO 1 features two channels with a classic standard amp controls interface, reverb control for each channel, MIDI ports, on board tuner, aux in and headphones out, FX loops, XLR Line Outs, Boost, and a powerful 250W power amp with an impressively warm tone and incredible dynamic.
- You can customize the REVERB parameters as for your preference thanks to the DV MARK EVO SOFTWARE. 19) MUTE/TUNER The DV Mark EVO 1 features an onboard tuner that lets you tune your instrument at a regular 440Hz tuning, half - REVERB 1 ON/OFF switching can be controlled by the EVO controller.
® (Celestion ® Vintage 30 ® 31) USB - This USB port allows to connect your DV Mark EVO 1 to a computer thanks to an USB A/B (printer) cable to set your • 2x12 CELESTION (Vox AC 30 ®...
MIDI IN: DIN 5 poles DV Mark amps/combos are manufactured to be sold and used in the country of pur- chase, and are factory preset to that country’s voltage. Due to homologation issues, the CONTROLS (for each channel) voltage may not be changed.
Page 7
The EVO 1 can be controlled also via programmable MIDI pedalboard as for the MIDI commands listed below: - Connect the USB port on the rear panel of the DV Mark EVO 1 to a computer using a USB A/B (printer) cable, when the unit is communicating with the software the connection LED on the left bottom side will turn from grey into green.
Need help?
Do you have a question about the EVO 1 and is the answer not in the manual?
Questions and answers