MORE INFORMATION For warranty and service information, please contact your local DV Mark distributor (contact information available at www.dvmark.it). For more technical information, please visit us at www.dvmark.it and fill out the form on the Contact Us page. We hope you enjoy your amplifier and use it to make great music! “The Lightning Flash with arrowhead symbol...
Page 3
The DV MICRO 50 features two channels with very user-friendly and effective controls, on-board reverb, XLR Line Out plus a headphone output and an a handy mini-plug aux in jack for connecting an MP3 player to mix with your sound so you can practice anywhere and anytime you like, always with professional sound.
FRONT PANEL 1) INPUT Connect your guitar to this input using a standard ¼” shielded instrument cable. It’s also designed to perfectly interface with all the effects most used by guitarists. 2) LEVEL This knob sets the input level, turn it up gradually until you reach your desidered volume. 3) BASS This knob controls the amount of low frequencies in your sound.
16) VOLTAGE SELECTOR The DV MICRO 50 features a 120V/240V Voltage Selector to use the amp in countries with different voltages, so make sure the switch on the rear panel is on the correct voltage before connecting it to the AC power, and the fuse is the right value for that voltage (This selector is not available on the 100V version).
Need help?
Do you have a question about the DV Micro 50 and is the answer not in the manual?
Questions and answers