Important Safety Instructions - Kenmore 152.83220 Owner's Manual

IMPORTANTSAFETY INSTRUCTIONS
Please read all instructions before using this product. Save these instructions for
easy reference.When using electrical appliances, basic precautions shotfld always
be followed to redlme breakage, risk of fire, electric shock and injury to persons
including the following:
• Read all insLnlctions before operating the air cleaner.
• Place air cleaner where it is not easily lmocked over by persons in the house°
hold.
• Always lmplug air cleaner when not in use.
. Do not use any product with a damaged cord or plug or ff product
malfunctions, is dropped or damaged in any manner.
• Keep the power cord away from heated surfaces.
, Do not use air cleaner outdoors.
• Never use air cleaner unless it is fully assembled.
• Do not run power cord under carpets, and do not cover with throw rugs.
Arrange cord such that it will not be tripped over.
° Do not use air deaner where combustible gases or vapors are present,
• Do not expose the air cleaner to lain, or use near water, in a bathroom, laundry
area or other damp location.
- To disconnect the air cleaner, first turn speed control to OFF position and
remove plug from the outlet.
• Do not allow foreign objects to enter ventilation or exhaust opening as this
may cause electric shock or damage to the air cleaner. Do not block air outlets
or intakes.
. Locate air cleaner near power outlet and avoid using an extension cord.
• The air cleaner has a polarized plug (one blade is wider than tile other').
To reduce risk of shock, this plug is intended to fit in a polarized outlet only
one way. K the plug does not fit f_dlly in the outlet, reverse the plug. DO NOT
attempt to defeat this safety feature.
• A loose fit between the plug and the AC outlet (receptacle) may cause overheat-
ing mid a distortion of the phtg. Contact a qualified electrician to replace loose
or worn receptacles.
• Do not sit, stand or place heavy objects on the air cleaner.
- Disconnect power supply before servicing.
• WARNING:To reduce risk of fire or electric shock, do not use this product
with any solid-state speed control device.