Garmin GPSMAP 495 Owner's Manual page 81

To edit the route on the map:
1. Press MENU twice to open the Main Menu. Use the ROCKER to
select Route from the vertical menu of tabs.
2. Select the route, and press ENTER. Press MENU to open the
Route Review Page options menu.
3. Highlight Edit on Map, and press ENTER.
4. Use the ROCKER to select a location on the route (the route
turns white when the arrow is over the route). Press ENTER.
5. Use the ROCKER to drag the route to the new point location,
and press ENTER.
Editing the route on the map
6. If the New Waypoint Page opens, edit the waypoint, highlight OK,
and press ENTER.
7. Repeat steps 4 through 6 until all points are added to the route.
Press QUIT to finish.
GPSMAP 495 Owner's Manual
Automotive Mode Pages and Features >
To set speed and fuel/plan your route:
1. Open the Route Review Page options menu.
2. Highlight Plan Route, and press ENTER. (Highlight Set Speed
and Fuel in Aviation Mode.)
Entering Speed and Fuel Flow for trip planning
3. Enter the data for Speed and Fuel Flow. When in Marine and
Automotive Modes, you also can enter the date and time of you
departure. Press QUIT to return to the Route Review Page.
NOTE: Fuel flow rates are measured in "units per hour". System
setting changes for units of measure (statute, nautical or metric)
do not affect the fuel flow measure. You should enter fuel
flow rates based on information for your vehicle (such as the
operator's manual or performance specifications) and note the
units of measure (gallons or liters).
Editing and Managing Routes
73