Garmin 4000 Series Owner's Manual page 37

V I
IeWInG nformatIon
To transfer data (waypoints, routes, tracks) to or from an SD card:
1. Insert an SD card into the SD card slot on the front of the unit.
2. From the Home screen, touch Information > User Data > Data
Complete one of the following:
• Touch Save To
Touch Merge From
•
existing GPS data.
• Touch Replace From
To back up data to a PC:
1. Follow steps 1 and 2 above to save the data to an SD card.
2. Insert the SD card into an SD card reader that is attached to a PC.
3. From Windows Explorer, open the Garmin\UserData folder on the SD card.
4. Copy the UserData.ADM file on the card and paste it to any location on your PC.
To restore backup data to your chartplotter:
1. Copy the UserData.ADM file from your PC to an SD card in a folder named Garmin\UserData.
2. Insert the SD card into your chartplotter.
3. From the Home screen on your chartplotter, touch Information > User Data > Data Transfer
> Card.
4. Touch Replace From
To copy or merge MapSource data to your chartplotter:
1. Insert the SD card into your chartplotter to allow it to place a file on the SD card. This file
provides information to MapSource to format its data. This only needs to be done the first time
you copy or merge MapSource data to your chartplotter.
2. Check your MapSource version on your PC by clicking Help > About
version is older than 6.12.2, update to the most current version by clicking Help > Check for
Software Updates.
3. Insert the SD card into an SD card reader that is attached to your PC.
4. From within MapSource, click on Transfer > Send to
5. From the Send to Device window, select the drive for the SD card reader and the types of
data you want to copy to your chartplotter.
6. Click Send.
7. Insert the SD card into your chartplotter.
8. From the Home screen on your chartplotter, touch Information > User Data > Data
> Card.
9. Touch Replace From Card or Merge From
chartplotter.
To transfer data to or from a network:
1. Connect the unit to a Garmin Network using the network port on the back of the unit and a
network cable.
2. From the Home screen, touch Information > User Data > Data
Complete one of the following:
Touch Clone User
•
Existing data is overwritten on those chartplotters.
GPSMAP 5000 Series Owner's Manual
Card to save waypoints, routes, and tracks to the SD card.
Card to transfer data from the SD card to the unit and combine it with
Card to overwrite items on your unit.
Card to restore the data.
Data to transfer waypoints, routes, and tracks to the other chartplotters.
Transfer > Card.
Device.
Card to copy or merge the data into your
Transfer > Network.
MapSource. If the
Transfer