Garmin 4000 Series Owner's Manual
  1. Manuals
  2. Brands
  3. Garmin Manuals
  4. GPS
  5. GPSMAP 4000 Series
  6. Owner's manual

Garmin 4000 Series Owner's Manual

Garmin owner's manual gpsmap 5000 series
Hide thumbs Also See for 4000 Series:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
GPSMAP
5000 Series
®
owner's manual

Advertisement

Table of Contents
loading

Related Manuals for Garmin 4000 Series

Summary of Contents for Garmin 4000 Series

  • Page 1 GPSMAP 5000 Series ® owner’s manual...
  • Page 2 Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto,...

  • Page 3: Introduction

    This manual includes information for the following products: • GPSMAP 5008 ® • GPSMAP 5208 ® • GPSMAP 5012 ® • GPSMAP 5212 ® Tips and Shortcuts Home • Touch from any screen to return to the Home screen. Menu •...

  • Page 4: Table Of Contents

    ntroductIon Introduction ...i Tips and Shortcuts ... i Manual Conventions ... i Quick Links ... i Warnings ... iv Important Information ... iv Getting Started ...1 Front and Rear Panels ... 1 Power/Backlight ... 2 Acquiring GPS Satellite Signals ... 3 Inserting and Removing SD Cards ...
  • Page 5 Configuring My Boat ... 38 Configuring Other Boats ... 40 Configuring XM Audio ... 40 Using the Marine Network ...41 Viewing Connected Garmin Marine Network Devices ... 42 Using Radar ...43 Understanding the Cruising Screen ... 44 Changing Radar Settings ... 47 Using Sonar ...48...

  • Page 6: Warnings

    Important Information MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright messages displayed to the consumer.

  • Page 7: Getting Started

    To turn on your unit for the first time, refer to the Initializing Unit Settings paragraph, Front and Rear Panels NMEA 2000 Network GPSMAP 5000 Series Owner’s Manual ettInG tarted GPSMAP 5208 shown - Front GPSMAP 5208 shown - Back ettInG tarted page...

  • Page 8: Power/Backlight

    ettInG tarted Power/Backlight To turn the unit on, press and release the I Agree to open the Home screen. NOTE: The first time you power on your unit, you must go through a setup sequence. See for details. To turn the unit off, press and hold the key.

  • Page 9: Acquiring Gps Satellite Signals

    Insert blank SD cards to transfer data such as waypoints, routes, and tracks to another compatible Garmin unit or a computer. The SD card slot is located on the bottom-right corner of the unit.

  • Page 10: Restoring Factory Settings

    From the Home screen, touch Configure > System > System Using the Simulator Mode Simulator mode turns the GPS receiver off for use indoors or for practice. The unit does not track satellites in simulator mode. CAuTION: Do not try to navigate using simulator mode because the GPS receiver is turned off.

  • Page 11: Understanding The Home Screen

    Overlay charts (page NOTE: Fish Eye 3D, and Fishing Charts are available only if you use a BlueChart g2 Vision SD card. • sonar—provides sonar information (only available if the unit is connected to a Garmin sonar module) (page 48). •...

  • Page 12: Using Charts

    Navigation Chart on a GPSMAP 5208 Navigation Chart Settings To access additional settings or options for the navigation chart, touch Menu. Weather—turns the NEXRAD weather overlay on or off. Only available when connected to a Garmin XM network device. See sInG harts 11).

  • Page 13: Understanding Chart Data

    Current Station Marine Services *Some symbols might appear differently on your Garmin unit. Other features common to most charts include depth contour lines (with deep water represented in white), intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids and symbols, and obstructions and cable areas.
  • Page 14 As you pan, the Depth reading of your current location remains in the lower-left corner of the screen (if your unit is connected to a sonar device through a Garmin Marine Network). Inset map To stop panning and return the screen to your boat’s current location, touch When you touch a point on the Navigation screen without dragging, a pointer ( spot, and a list of options appear along the right side.

  • Page 15: Viewing Tide Station Information

    of the pointer. If the point is near several objects and you touch Review, you are presented with a list of the objects near the pointer ( Navigate To—allows you to navigate to the selected location Create Waypoint—marks a waypoint at the selected location Information—allows you to view tide stations 30), weather information (if available, see Accessing Additional Object Information...

  • Page 16: Using Mariner's Eye

    SInG hartS Using Mariner’s Eye Mariner’s Eye provides an angled perspective from above and behind the boat (according to your course), and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and is beneficial when trying to identify entry and exit routes in unfamiliar harbors or anchorages.

  • Page 17: Using Bluechart G2 Vision

    Radar—If you are connected to a Garmin Marine Radar through the Garmin Marine Network, you can overlay your radar readings on the Mariner’s Eye screen. Mariner’s Eye With Radar Information Overlay Numbers—show or hide cruising, navigation, fishing, and sailing numbers as on the navigation chart.

  • Page 18: Using Mariner's Eye 3D

    You can insert or remove a BlueChart g2 Vision SD card while your Garmin GPS unit is on or off. Insert the SD card into the open SD card slot on your Garmin GPS unit and press in until it clicks.

  • Page 19: Using Fish Eye 3D

    Touch the button to view closer to your boat and lower to the water. Touch the move the view away from the boat. This is indicated by the scale ( screen. Mariner’s Eye 3D Settings To access additional settings or options from the Mariner’s Eye 3D screen, touch Menu. The options and additional settings are the same as the Mariner’s Eye screen Colors.

  • Page 20: Changing The Chart Settings

    SInG hartS Fish Eye 3D Settings To access additional settings or options for the Fish Eye 3D screen, touch MENu. sonar Cone—turn a cone on or off that shows the area covered by your transducer. sonar Data—visually show the sonar readings received by your transducer for the best combination of sonar and mapping.

  • Page 21: Using Tracks

    • spot Depth—turns on spot soundings and sets a dangerous depth. • light sectors—adjusts the drawing of light sectors on the map. • symbols—sets the navaid symbol set (NOAA or IALA). • symbol size—adjusts the size of the symbols shown on the map. Using Tracks A track is a recording of your path.

  • Page 22: Using Fishing Charts

    SInG hartS • Wrap—continuously records the track log, wrapping through the available memory (replacing the oldest track data with new data). • Interval—defines the frequency at which the track plot is recorded. Recording more frequent plots is more accurate, but fills the track log faster. • Interval—sets whether the interval is determined by distance, time, or resolution. (Press Change to set the quantity.) • Distance—records the track based on a distance between points. • Time—records the track based on a time interval. • Resolution—records the track plot based on a variance from your course. This setting is recommended for the most efficient use of memory. The distance value is the maximum error allowed from the true course before recording a track point.

  • Page 23: Viewing Aerial Photos

    NOTE: When enabled, the high resolution satellite images are only present at lower zoom levels. If you cannot see the high resolution images in your BlueChart g2 Vision region, either zoom in further by touching the > Appearance > Detail. Photo Overlay Off Blend at 50% Viewing Aerial Photos...

  • Page 24: Viewing Current Station Information

    SInG hartS NOTE: Touch To access aerial photos from the navigation chart: Touch a camera icon, and ➊ then touch Review. ➌ Touch View Fullscreen. Viewing Current Station Information Current Station Information If current stations are available in your g2 Vision region, they appear on the navigation chart as a highlighted arrow. This detailed icon shows the current’s speed and direction at a glance.

  • Page 25: Using Combinations

    SInG ombInatIonS sInG ombInatIons Use the Combinations screen to view a combination of different screens at the same time. The number of options available on the Combinations screen depends on the optional network devices you have connected to your GPSMAP 5000 series unit and if you are using an optional BlueChart g2 Vision SD card.
  • Page 26 SInG ombInatIonS To customize the screen combinations: While viewing a combinations screen, touch Menu > Change Combination. OR From the Home screen, touch Combinations > Unused Combination screen  Combination screen 2 Data bar Touch Num Functions to change the number of combination screens (1-4). Touch Data to toggle the data bar on or off. Touch a combination screen button to select the screens to view. 3. Touch Done. NOTE: When you select the combination screens to view, you are only able to choose from the options available to your unit.

  • Page 27: Where To

    Where To Use the option on the Home screen to search for and navigate to nearby fuel, repairs, and other services, as well as waypoints and routes. NOTE: You must create waypoints and routes before you can navigate to them. You can navigate to a destination using one of three methods: Go To, Route To, or Guide To.
  • Page 28 here 3. Touch the marine service item to which you want to navigate. A screen containing information about the selected marine service appears. Touch Navigate Touch Go To. OR Touch Guide To when using a preprogrammed BlueChart g2 Vision card to use Auto Guidance. 6. Follow the colored line on the screen to the destination. Go To Screen To stop navigating: From the chart, Touch Menu, and then touch Stop Guide To Screen (with g2 Vision Card) Navigating. GPSMAP 5000 Series Owner’s Manual...

  • Page 29: Creating And Using Waypoints

    To search for a destination by name: From the Home screen, touch Where To > Search by 2. Touch characters to spell at least a portion of the name of your destination. 3. Touch Done to view the 50 nearest destinations that contain your search criteria. Touch the desired location > Navigate To > Go To (or Route Creating and Using Waypoints You can store up to 1,500 alphanumeric waypoints with a user-defined name, symbol, depth, and water temp for each waypoint. To create a new waypoint: From the Home screen, touch Charts > Navigation 2. Touch the location you want to designate as a waypoint. A pointer...
  • Page 30 here 3. Touch Create Waypoint. 4. Touch one of the following: • Edit Waypoint—designates a specific name, symbol, water depth, water temperature, or position. • Delete—deletes the waypoint. • Navigate To—goes to the waypoint. • Back—returns to the navigation chart. To mark your current location as a waypoint: 1. From the Home screen, touch Mark. Touch Edit Waypoint to designate a specific name, symbol, water depth, water temperature, or position. Touch Back or Home to return to the Home screen.
  • Page 31 2. Touch the button for the waypoint you want to edit. Touch Edit Waypoint. Touch the waypoint attribute you want to change (Name, Symbol, Depth, Water Position). NOTE: From the Home screen, touch Information > User Data > Waypoints to display the list of all waypoints. Touch the waypoint you want to edit. To move the waypoint on the navigation chart: 1. Touch the waypoint on the navigation chart.

  • Page 32: Creating And Using Routes

    here Creating and Using Routes You can create and store up to 20 routes, with up to 250 waypoints each. To create a route from your present location: 1. From the Navigation Chart, touch your destination. The destination is indicated by a pointer Touch Navigate To > Route 3. Touch the location where you want to make the last turn toward your destination. Touch Add Turn. 5. To add additional turns, continue to touch the location where you want to make a turn (working backward from the destination) and then touch Add Touch Done to finish the route or To create a route in another location:...
  • Page 33 2. If necessary, touch and drag the screen until the route’s starting point is displayed. Touch the route’s starting point. The starting point is indicated by the pointer Touch Add Turn. 4. Touch the location of the first turn. Repeat until the route is complete. Touch Done. To create a route using Auto Guidance: Auto Guidance is available with a preprogrammed BlueChart g2 Vision SD card. 1. From the Navigation chart, touch your destination. Touch Navigate To > Guide NOTE: To change the auto guidance path to a route, touch the end of the path and then touch Navigate To...
  • Page 34 here 2. Touch the route to edit. Route. You can edit the route name, turns, or delete the route. Touch Edit GPSMAP 5000 Series Owner’s Manual...

  • Page 35: Viewing Information

    IeWInG nformatIon Use the Information screen to access information about tides, currents, celestial data, user data, other boats, gauges, and video. You can also select tide, current, and celestial information for a specific station directly from the Navigation chart. Touch the desired station > Chart Notes.

  • Page 36: Viewing Celestial Information

    IeWInG nformatIon To view the Current Report for the selected station, touch Show Viewing Celestial Information Use the Celestial screen to view celestial data for sun and moon rise/set, moon phase, and approximate sky view location of the sun and moon. To view celestial information from the Home screen, touch Information > Celestial. Touch Change Date > Manual to view information for a different date. Touch Change Time to view information for a specified time on that date. Touch time.
  • Page 37 4. Copy the UserData.ADM file on the card and paste it to any location on your PC. To restore backup data to your chartplotter: 1. Copy the UserData.ADM file from your PC to an SD card in a folder named Garmin\UserData. 2. Insert the SD card into your chartplotter.

  • Page 38: Viewing Information On Other Boats

    IeWInG nformatIon • Touch Merge User Data to transfer data between all the chartplotters connected to the network. Unique data is combined with existing data on every chartplotter. Viewing Information on Other Boats To view information about other boats from the Home screen, touch NOTE: To view information about other boats, your unit must be connected to an external AIS (Automatic Identification System) or DSC (Digital Selective Calling) device. AIs list—displays information about all of the boats your unit is monitoring.

  • Page 39: Viewing Gauges

    IeWInG nformatIon Viewing Gauges Use the Gauges screen to view engine gauges in an analog or digital format. NOTE: You must be connected to a NMEA (National Marine Electronics Association) 2000 network capable of sensing engine data to view the gauges. To select an analog or digital screen: 1. To view the Gauges from the Home screen, touch Information > Gauges.

  • Page 40: Configuring The Unit

    Temperature—individually sets units of measure for temperature to Celsius (ºC). NOTE: You must be receiving NMEA Sonar depth data or using a Garmin sounder module to view depth and temperature information. • Distance—individually sets the units of measure for distance readings (Miles, Kilometers, or Nautical Miles).

  • Page 41: Configuring Communications Settings

    To change the communications settings from the Home screen, touch Communications. Port Types—touch each port’s input/output format when connecting your unit to external NMEA or other Garmin devices. • NMEA std.—supports the input or output of standard NMEA 0183 data, DSC, and sonar NMEA input support for the DPT, MTW, and VHW sentences.

  • Page 42: Setting Alarms

    onfIGurInG the 3. Touch the NMEA output sentence to select on or off. Touch Off to disable, or touch On to enable the 0183 NMEA output sentence. Posn. Precision—adjusts the number of digits right of the decimal point for transmission of NMEA output. Waypoint IDs—selects how the unit outputs waypoint identifiers Defaults—resets NMEA 0183 settings to their default settings NMEA 2000 setup (optional)—provides a means of differentiating units in a NMEA 2000 network.
  • Page 43 onfIGurInG the 3. Touch On to turn the alarm on and then use the touch screen keyboard to specify alarm information. Setting Navigation Alarms To set a navigation alarm from the Home screen, touch Configure > Alarms > Navigation. Anchor Drag—sets an alarm to sound when you exceed a specified drift distance. Arrival—sets an alarm to sound when you are within a specified distance or time from a destination waypoint.

  • Page 44: Configuring My Boat

    Flash Flood NOTE: You must have a subscription to XM WX Weather and a GDL 30/30A connected via the Garmin Marine Network to view weather information. Refer to Configuring My Boat To configure settings for your boat from the Home screen, touch Auto Guidance—sets the Auto Guidance parameters for your boat:...
  • Page 45 Transducer—sets the temperature source, select sonar cone angles, and calibrate water speed. • sonar Cone Angles—sets the angle, in degrees, of the sonar cone so that it is accurately depicted on the Fish Eye 3D screen when using a transducer other than the standard Garmin transducer. Touch either 200kHz angle.

  • Page 46: Configuring Other Boats

    Presets, delete a preset channel. NOTE: You must connect the optional GDL 30A XM receiver into the Garmin Marine Network, and have a subscription to XM Radio to use XM audio features. For more information, refer to...

  • Page 47: Using The Marine Network

    Garmin chartplotters quickly and easily. The GPSMAP 5000 Series units as well as the GPSMAP 4000 series units and previous Garmin Marine Network compatible chartplotter models (such as the GPSMAP 3010) can be connected to your network to share data. With the Garmin Marine Network, you can: •...

  • Page 48: Viewing Connected Garmin Marine Network Devices

    Viewing Connected Garmin Marine Network Devices To view all connected Garmin Marine Network Devices from the Home screen, touch System > System Information > Network Each connected device is listed along the right side of the screen. To assign an alias (name) to one of the devices for identification purposes, touch the device’s onscreen button.

  • Page 49: Using Radar

    When you connect your chartplotter to an optional Garmin Marine Radar such as a GMR 404/406 or GMR 18, you can view more information about your surroundings. The radar connects through the Garmin Marine Network and shares radar data with all networked chartplotters.

  • Page 50: Understanding The Cruising Screen

    SInG adar Understanding the Cruising Screen Use the Cruising screen to view a full-screen image of the gathered radar information. Your position is in the center of the screen, and the rings provide distance measurements. Range rings Heading line The zoom scale represents the distance from your position (the center) to the outermost ring. Each ring represents an even division of the zoom scale.
  • Page 51 Guard Zone—defines a zone either fully or partially surrounding your boat. An alarm sounds when a detected object enters this zone. Touch boundaries by touching Adjust Guard Zone: • Corner 1 (and Corner 2): Touch want the first corner of the guard zone. Touch screen where you want the other corner of the guard zone.
  • Page 52 SInG adar MARPA Target (only appears when you are targeting a tagged MARPA object)—opens the MARPA target information window. You can get MARPA information or remove MARPA objects from this window. MARPA target status unknown (Lost) Tracking MARPA object MARPA object targeted Dangerous MARPA object...

  • Page 53: Changing Radar Settings

    Radar Overlay Screen Options To access additional settings or options for the radar overlay screen, touch Menu. There are two sets of options you can access, radar or chart. The radar setup options are the same as the radar cruising screen (page 44).

  • Page 54: Using Sonar

    When connected to an optional sounder module such as the GSD 22 and a transducer, your unit can be used as a fishfinder/flasher. The sounder module connects through the Garmin Marine Network and shares sonar data with every chartplotter connected to the network.

  • Page 55: Understanding The Split Frequency Screen

    Depth, temperature, and water speed Zoomed depth scale GPS speed and GPS heading Zoom level Transducer frequency or beam width Understanding the Split Frequency Screen Use the Split Frequency screen (dual frequency transducer only) to view both the 50kHz and 200kHz frequencies on the same screen.

  • Page 56: Setting Up Sonar

    SInG onar Temperature and depth Time elapsed Transducer Temperature Log The temperature appears along the right side and the time elapsed appears along the bottom. The graph scrolls to the left as information is received. Setting Up Sonar Use the Sonar Setup screen to define and adjust settings universal to all sonar screens. From the Home screen, touch sonar Color scheme—choose white (black, if using night mode colors) or blue.

  • Page 57: Advanced Sonar Settings

    • low—the least sensitive setting. Only the strongest returns are highlighted in white. Overlay Numbers—shows or hides water temperature, water speed (if your transducer is capable), and navigation. NOTE: To show water temperature or water speed, change the setting to Auto. If the connected transducer is capable, the data is shown.

  • Page 58: Using Xm Wx Weather™ And Audio

    Xm WX W sInG To use XM WX Satellite Weather, you must have a Garmin GDL 30 or 30A XM receiver and an activated XM WX weather subscription. To use XM Audio, you must have the Garmin GDL 30A XM receiver and an XM Audio subscription.
  • Page 59 Xm WX W SInG eather and udIo To view the weather legend from the Home screen, touch show. NEXRAD is shown independently or with a variety of other weather information. To turn cloud cover on or off, touch Understanding Storm Cell Information The storm cells show storms as well as the storm’s projected path in the immediate future.
  • Page 60 Xm WX W SInG eather and udIo center provides four forecasts at 12-hour intervals (12 Hrs, 24 Hrs, 36 Hrs, and 48 Hrs), as well as the current conditions (Now). Hurricane Understanding Marine Warnings When a Marine Warning is issued, the area for the warning is highlighted in red. To view information about the warning, touch the warning area.

  • Page 61: Viewing Forecast Information

    Xm WX W SInG eather and udIo Viewing Forecast Information Forecasts show the weather conditions including fronts and precipitation. To view the forecast for another time period, touch Next shown. Continue to touch Next Forecast view forecast information for another location, touch and drag the screen until the desired location appears.

  • Page 62: Viewing Sea Conditions

    Xm WX W SInG eather and udIo Viewing Sea Conditions Sea Conditions provide surface conditions including winds, wave height, wave period, and wave direction. Understanding Surface Winds Wind barbs indicate from which direction the wind is coming. The wind barb is a circle with a tail. Wind speed is indicated by the different combination of flags that are attached to the tail.

  • Page 63: Viewing Visibility Information

    Xm WX W SInG eather and udIo Understanding Surface Pressure This feature shows pressure isobars and pressure centers. The isobars connect points of equal pressure. Pressure readings can help determine weather and wind conditions in an area. High pressure areas are generally associated with fair weather. Low pressure areas are generally associated with clouds and the chance of precipitation.

  • Page 64: Viewing Buoy Reports

    Xm WX W SInG eather and udIo Viewing Buoy Reports Report readings are taken from buoys and coastal observation stations. These readings are used to determine air temperature, dew point, water temperature, tide, wave height and period, wind direction and speed, visibility, and barometric pressure. To view a buoy report, touch a buoy on the screen.

  • Page 65: Using Xm Audio

    SInG eather and udIo Using XM Audio When a GDL 30A is connected to the Garmin Marine Network and to the audio input of your boat, you can listen to XM Audio channels. Selecting an XM Audio Channel Configure Audio. Touch a channel to tune To access XM Audio from the Home screen, select >...

  • Page 66: Appendix

    ppendIX Specifications Physical Specifications size: GPSMAP 5008/5208: 6.8" H x 10.1" W x 4.17" D (173.5 x 256 x 105.9 mm) GPSMAP 5012/4212: 9.47" H x 13" W x 4.7" D (240.5 x 330 x 119.2 mm) Weight: GPSMAP 5008/5208: 6 lbs. (2.72 kg) GPSMAP 5012/5212: 9.5 lbs.

  • Page 67: Initializing Unit Settings

    Initializing Unit Settings The first time you turn your unit on, you must configure a series of initial settings. These settings must also be configured when restoring factory settings configured later from the Configure screen. The settings are as follows: •...

  • Page 68: Calibrating The Touchscreen

    3. Follow the instructions on the screen until “Calibration is complete” is displayed. 4. Touch OK. NMEA 0183 and NMEA 2000 The GPSMAP 4000 series unit can accept data from both NMEA 0183 compliant devices and certain NMEA 2000 devices connected to an existing NMEA 2000 network on your boat. NMEA 0183...

  • Page 69: Nmea 2000 Pgn Information

    To connect the GPSMAP 5000 series unit to an existing NMEA 2000 network, see the GPSMAP 4000/5000 series installation instructions. NMEA 2000 PGN information GPSMAP 4000/5000 series units accept the following PGN information from a NMEA 2000 network: • 059392 = ISO acknowledgement •...

  • Page 70: Messages And Alarms

    ppendIX Messages and Alarms AIs: Dangerous Target—an AIS target currently presents a collision threat. Alarm Clock— the alarm clock alarm has sounded. Anchor Drag Alarm—boat has drifted out of the user-set distance range. Antenna Input is shorted —there is a short in the wiring to the GPS 17 antenna. Approaching Waypoint <name>—boat is a specified alarm distance from the destination waypoint.
  • Page 71 ppendIX Deep Water Alarm—(sonar) boat has entered user-defined value for deep water. Directory Item With This MMsI Already Exists—MMSI unit already in directory. Directory Memory is Full Can’t Create Entry—DSC directory is full, no more entries can be created. Distress Call Received from <name>—distress call has been received by the DSC module. Drift Alarm—boat has moved a user-defined distance.
  • Page 72 ppendIX Map Format Is Not supported—a map format on a preprogrammed SD card is not supported. Marine Weather Warning—(XM WX weather) there is a weather warning in effect. MARPA: Dangerous Target—(radar) a MARPA target has become dangerous. MARPA: Target lost—(radar) unable to track a marpa target any longer. MDB Waypoint Memory is Full, Can’t Create Waypoint—MDB waypoint memory is full.
  • Page 73 ppendIX Route Truncated—some points on the end of the route have been discarded. severe storm Warning—(XM WX weather) there is a severe storm warning in effect. shallow Water Alarm—(sonar) the boat has entered the user-defined shallow water depth. simulating Operation—the unit is in simulator mode. sonar Failed, unit Needs Repair—there has been a sonar failure and the unit needs to be sent in for repair.

  • Page 74: Product Registration

    Serial Number: ___ ___ ___ ___ ___ ___ ___ ___ ___ Contact Garmin Contact Garmin if you have any questions while using your unit. In the USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020, Monday–Friday, 8 AM–5 PM Central Time;...

  • Page 75: Fcc Compliance

    Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will, at its sole option, repair or replace any components that fail in normal use.

  • Page 76: Weather Data Warranty

    Garmin. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction.

  • Page 77: Software License Agreement

    Software remain in Garmin. You acknowledge that the Software is the property of Garmin and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin.

  • Page 78: Index

    (weather) 55 front of boat 47 front panel 1 fronts (weather) 55 FTC 47 gain radar 44 sonar 51 Garmin contact information 68 gauges 33 go to 21 GPS 34 performance 60 grid north 35 guard zone 45 guide to 21...
  • Page 79 panning 8 photos 16 POI data 18 pointer 8 port types 35 position 35 posn precision 36 precipitation 52 pressure center 55 pressure gradient 57 pressure isobars 57 pressure unit settings 35 projected path 53 quick links i radar 43 radar overlay 46 rain cltr 44 range rings 10...
  • Page 82 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.

This manual is also suitable for:

5000 seriesGpsmap 5208Gpsmap 5008Gpsmap 5012Gpsmap 5212

Table of Contents