Garmin 4000 Series Owner's Manual page 14

u c
SInG hartS
4. Touch Navigate To.
5. Touch Go To or Guide
to use Auto Guidance, page 27).
6. Follow the colored line on the screen to the destination.
Panning the Navigation Chart
Touch and drag the Navigation screen to pan away from your current location, and scroll to other
areas on the navigation chart. The position icon ( ) stays at your present location. If the position
icon leaves the map when you pan, an inset map appears on the left of the screen so you can keep
track of your current position.
As you pan, the Depth reading of your current location remains in the lower-left corner of the screen
(if your unit is connected to a sonar device through a Garmin Marine Network).
Inset map
To stop panning and return the screen to your boat's current location, touch
When you touch a point on the Navigation screen without dragging, a pointer (
spot, and a list of options appear along the right side. These options change, depending on the point
you touched. Touch a button to access that option.
You can change the position of the pointer by touching and dragging it to the desired location.
Review—(does not appear if the pointer is not near an object - if the pointer is near only one object,
its name appears instead of Review.) Touch this button to view details of the objects in the vicinity

To (available when using a preprogrammed BlueChart g2 Vision card
Navigation Chart on a GPSMAP 5208
stop Panning.
) appears at that
GPSMAP 5000 Series Owner's Manual