Bosch ROS65VC Operating/Safety Instructions Manual page 3

Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the power tool's operation. If damaged,
have the power tool repaired before use.
Safety Rules for Random Orbital Sanders
Hold power tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or it own cord. Contact with a "live"
wire will make exposed metal parts of the tool
"live" and shock the operator.
Unplug the sander before changing
accessories.
If your tool is equipped with a dust bag,
empty it frequently and after completion
of sanding.
Always wear eye protection and a dust
mask for dusty applications and when
sanding overhead.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts.
Do not wet sand with this sander.
Do not use PSA pad on random orbit
sanders whose
12,000/min.
Do not use sandpaper intended for larger
sanding pads.
Clamp or secure workpiece when
sanding.
Keep the cord away from the spinning
pad and sandpaper.
speed exceeds