Installing/Removing Battery Pack; Operation; Trimming Instructions - Black & Decker CHH2220 Instruction Manual

INSTALLINg / reMOVINg BATTery PACk
wArNINg:
Make certain the lock-off button is engaged to
prevent switch actuation before removing or installing battery.
TO INSTALL BATTery PACk: Insert battery pack into tool until
an audible click is heard (figure 2). Make sure battery pack is fully
seated and fully latched into position.
TO reMOVe BATTery PACk: Depress the battery release button
in the back of the battery pack and pull battery pack out of tool
(figure 2).
2
SwITCH
To turn the unit "ON", slide the lock off button, shown in figure 3,
backward and squeeze the trigger switch.
Once the unit is running, you may release
the lock off button.
In order to keep the unit running you must
continue to squeeze the trigger. To turn the
unit "OFF", release the trigger.
wArNINg:
Never attempt to lock a
switch in the ON position.

TrIMMINg INSTrUCTIONS

1. wOrkINg POSITION – Maintain
proper footing and balance and do not
overreach. Wear safety goggles, non-
skid footwear when trimming. Hold the
unit firmly in both hands and turn the
unit ON. Always hold the trimmer, as
shown in the illustrations in this manual,
with one hand on the switch handle and
one hand on the bail handle. (figure 4)
Never hold the unit by the blade guard.
8

OPerATION

3
4