Kenmore 116.31040 Use And Care Manual page 11

PaLEHERGHT SELECTION 1
To select a pile height setting:
Turn off vacuum cleaner. Select a pile
height setting by tilting the vacuum
cleaner back until front wheels are lifted
slightly off the floor°
Slide the adjustment lever to the correct
setting.
There are four (4) pile height settings on
the vacuum cleaner. Use the LOW setting
for most low-pile carpets and bare floor
cleaning (with agitator OFF), and the
HIGH setting for high-pile carpets like
shag carpet, scatter rugs, etc. Use the
other settings as needed for carpet
heights in between.
CAUTION
Refer to your carpet manufacturers
cleaning recommendations. Some
more delicate carpets may require
that they be vacuumed with the
agitator turned off, to prevent carpet
damage.
11