Primary Filter Cleaning - Kenmore 116.31040 Use And Care Manual

I
PRIMARY FnLTER CLEANRNG
it is recommended to clean filter with
cold water at least every three (3)
months.
Check the " filter frequently and
clean whenpr=mary
dirty.
Rear
1. Remove the
rear cover by
reSsing the tabs
cated on each
side.
2, Lift cover off
of vacuum
cleaner_
3. Remove the
primary filter from
the rear cover.
4. Wash with cold
water oniywDO
NOT use detergent
or soap.
Primary
5. Once the filter is washed clean,
squeeze by hand and albw to air dry.
6. Allow filter to
dry
24 hours before
putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filter.
DO NOT operate without primary filter
installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
4. Reinstall the foam filter into the rear
cover.
5. Reinstall the rear cover by snapping
into place on the back of the vacuum
cleaner. A noticeable "click" should be
heard.
2O