Appendix; Mounting Your Nüvi - Garmin 300 Owner's Manual

a
PPendix
Mounting Your nüvi
For a tight grip, clean and dry your windshield before mounting the
suction cup.
To mount the suction cup mount:
1. Plug the small end of the cable into the back of the mount;
plug the other end into a power receptacle in your vehicle.
2. Place the suction cup on the windshield.
3. Flip the lever back, toward the windshield.
4. Open the antenna. Fit the bottom of your nüvi into the cradle.
5. Tilt your nüvi back until it snaps in place. If necessary, rotate
the cradle.
➊
Plug in the Cable
Garmin © 2005–2006
a
PPendix
➋
Mount the Suction Cup Mount
Check your state and local traffic
laws before mounting. Currently,
state laws in California and
Minnesota prohibit drivers from
using suction mounts on their
windshields while operating
motor vehicles. Other Garmin
dashboard or friction mounting
options should be used. See
the product information sheet
that came in the box for more
information.
windshield
➍
➌
Place the nüvi in the Mount
55
➎
nüvi Owner's Manual