ZonePro
Notes - Nightclub Application
1. The ZonePro 640 units are located in the manager's office.
2. The ZCs in the nightclub are situated near the bar and allow source selection and volume control.
3. The feed from the nightclub allows the restaurant to receive the signal from the nightclub
allowing it to be sent to the entire restaurant.
4. Output Delay is used to delay the signal from the nightclub area so it arrives at the same
time as the acoustic signal from the nightclub.
5. The zone controllers in the restaurant allow source selection and volume control of the
restaurant area.
®
™
Application Guide
ZonePro™ User Manual
Section 5
41