Connections; Pc Gui Installation - dbx Zone Pro 640 User Manual

Section 1

1. 4 - Connections

When setting up the ZonePro units, make connections as follows:

1.5 - PC GUI Installation

Note:You must disable virus protection software during the installation of ZonePro Designer.
4 ZonePro ™
Getting Started
Example Setup
• Always make connections prior to applying power to the unit.
• Connect the outputs from the sending devices (mixer, microphone, CD, DVD player or
satellite, etc..) to either of four RCA, or two Euroblock input connectors.
• Make output connections from the Euroblock connectors to the
input of the selected power amps or powered speakers.
• It is recommended that the power amps are turned off prior to cycling power to the
ZonePro. Always make sure that your power amps are the last item turned on and the first
turned off. Once all of the connections have been made and the unit is powered up, you
can navigate through the entire signal path of the ZonePro from the included GUI.
Minimum System Requirements
1 GHz processor
Windows 2000 or XP
128 meg RAM
Recommended screen resolution:
1024 x 768 pixels or higher
Installation
• Install the ZonePro GUI software from either the dbx website at www.dbxpro.com or from
the included CD ROM onto your computer.
• Once the software setup is downloaded, double click on the file named: ZonePro setup.
• The application will proceed to prompt you for the installation location.
• Once the software installation has been completed, it is recommended that you restart your
computer.
User Manual
ZonePro
®
™