Troubleshooting - Garmin 2 Owner's Manual

a
PPendIx

Troubleshooting

E
N
Problem/Question
My Navus 2 never gets
satellite signals.
How do I know my
Navus 2 is in USB
mass storage mode?
My computer never
senses that the Navus
2 is connected.
I cannot find any
drives named "Garmin"
in my list of drives.
I get a message
saying "Unsafe
Removal of Device"
when I unplug the USB
cable.
2
Solution/Answer
Take your Navus 2 outside, away from tall buildings and
trees.
When your Navus 2 is in USB mass storage mode, a
picture of a Navus 2 connected to a computer is shown.
Also, you should see two new removable disk drives listed
in My Computer.
1. Unplug the USB cable from your computer.
2. Turn the Navus 2 off.
3. Plug the USB cable into your computer and your
Navus 2. The Navus 2 automatically turns on and
goes into USB mass storage mode.
If you have network drives mapped on your computer,
Windows may have trouble assigning drive letters to your
Navus 2 drives. See the operating system's Help file to
learn how to rename and assign (map) your drives.
When you are ready to disconnect your Navus 2 from your
computer, double-click the
your system tray. Select
click Stop. Select the Navus 2 drives, and click OK. You
can disconnect your Navus 2 from your computer now.
Unplug or Eject
USB Mass Storage
Navus 2 Owner's Manual
icon in
Device, and