Jensen JIPS-290I User Manual page 8

8.) AUX IN Jack
9.) Composite Video Out Connector
REMOTE CONTROL
1.) POWER ON/STANDBY Button
2.) iPod MENU UP Button
3.) PLAY / PAUSE Button
4.) SKIP/FAST BACKWARD Button
5.) ENTER Button
6.) SKIP/FAST FORWARD Button
7.) iPod MENU Button
8.) iPod MENU DOWN Button
9.) FUNCTION Button
10.) VIDEO ON/OFF Button
11.) MUTE Button
12.) VOLUME Up (+) Button
13.) VOLUME Down (–) Button
BASIC OPERATION
Turning on/off the unit
1). Press the POWER ON/STANDBY button on the remote control or
turn on the unit. The rings around the POWER and VOLUME Up/Down Buttons will light solid
blue for iPad/iPod/iPhone mode
2). Press the remote POWER ON/STANDBY button again or press and hold the
main unit to switch the unit to standby mode.
Notes:
 Make sure the AC power cord from this unit is properly connected to a 120V~ 60Hz
household AC power outlet.
 Make sure that the minimum distance around the whole unit for ventilation is 10cm.
Function mode selection
Press the FUNC button on the remote control or tap the FUNC button on top panel of the unit to
select iPod or AUX Mode.
iPad/iPod/iPhone mode -
light solid.
AUX mode – The blue rings around the VOLUME Up/Down and POWER buttons will flash every
4 seconds.
OPERATING INSTRUCTIONS
or will flash blue every 4 seconds in AUX mode.
The blue rings around the VOLUME Up/Down and POWER buttons
8
button on main unit to
button on