Jensen JIPS-290I User Manual page 10

Adjust the position of the support by turning the barrel shaped knob (located on the back
of the assembly) either clockwise or counter-clockwise until the front padded part of the
barrel touches the back of your iPad, iPod or Phone. The barrel shaped knob will move
forward or back as it's turned. The Apple device should be angled slightly backwards to
secure the docking.
RECHARGING YOUR APPLE DEVICE
This unit supports various models of
Even if the Dock is in standby mode, once your iPad, iPod or iPhone is docked onto the docking
connector, the charging will start automatically.
Note: Due to a change in iPod design, the charging function of this unit does not support the iPod
th
classic or 5 gen iPod video.
CONNECTING
1). Place your iPad/iPod/iPhone into the docking port by placing the connector on the bottom of
the iPad/iPod/iPhone onto the connector in the docking bay.
Note: Please be careful when placing the iPad/iPod/iPhone into the docking bay to avoid
damaging the 30-pin connector on the iPad/iPod/iPhone or on the docking system.
2). Press the POWER
and POWER buttons light solid.
Up/Down and POWER buttons flash every 4
control or tap the FUNC button on the main unit to select iPod/iPad/iPhone mode, the blue
LED rings will light solid.
3) Select music from your iPad, iPod or iPhone and press the PLAY/PAUSE button on the remote
to start playback.
4). Press the PLAY/PAUSE button on the remote control to pause the play back. Press it again to
resume.
5). Adjust the sound level by pressing the Volume + / – buttons.
Note: The volume level cannot be adjusted using the volume control on your iPad/iPod/iPhone
after being docked.
6). Press SKIP/FAST FORWARD or BACKWARD button on the remote control to select the
previous or next song.
7). Press the STANDBY button on the remote control or press and hold the
5 seconds to turn the unit to STANDBY mode after listening.
LISTENING TO YOUR iPad/iPod/iPhone
iPad, iPod or iPhone
button to turn on the unit,
If the unit is in AUX
with 30-pin dock connectors.
the blue rings around the VOLUME Up/Down
mode, the blue rings around the VOLUME
seconds. Press the FUNC button on remote
10
/ FUNC button for