Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Candy CTD 10662-07
Summary of Contents for Candy CTD 10662-07
- Page 1 WASHING MACHINE CTD 10662-07 Code: 31002630...
- Page 2 WASHING MACHINE CTD 10662 B3 C3 PROGRAMME SELECTOR Use this control to select the desired wash programme. Turn the selector (it can be turned in both directions) so that the programme is opposite the reference indicator (p). The temperature selected will depend on the programme.
- Page 3 Programme table mod CTD 10662 max. max. aprox. temp. espin max. washing powder load option keys C time setting speed load programme programme for min. ºC rpm/min • • 2h48’ 90º 1000 • • • • • • White • •...
- Page 4 B3 wash temperature When selecting a programme, the recommended wash temperature is automatically indicated, and the corresponding indicator lamp lights up. It is possible to lower or raise this temperature, by pressing the (B3) button Note: The temperature must be adjusted before selecting DEGREE OF SOILING. 5.- Press the key or keys for any options desired (C1, C2, C3, C4).
- Page 5 display. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly. 7.- To start the programme, once options have been chosen, press the key H. The washing machine will begin to operate.
- Page 6 Introductión Read this manual carefully as it offers practical advice to help you get the most from your washing machine. This «Instruction Installation Manual» contains everything you need to know about the everyday running of your machine. Please refer to this manual for installation and maintenance instructions.
- Page 7 • The manufacturer fits all the machines with an earth connection. Ensure that the electrical installation has an earth connection and that it is connected; if not, call a qualified Service Center. The earth connection is essential for user safety as it elimi- nates the risk of electrical discharge.
- Page 8 Setting up - Installation • Unpack the appliance. • Remove the 4 screws (A) from • Replace the 4 screws (A) and both clamps and the 4 fit the trims provided (D). screws (B). If your model offers this function: Position the protection sheet as shown in the diagram.
- Page 9 If your model offers this function: • To move the washing machine easily, turn the trolley lever to the right. Once you have finished moving the machine, return the lever to its original position. • Level the machine by adjusting the front feet. a) Turn the nut clockwise to release the screw on the foot.
- Page 10 Preparing the wash. Opening/ closing the drum ATTENTION: IT IS IMPORTANT TO MAKE SURE THAT THE DRUM IS CAREFULLY OPENED AND CLOSED, OTHERWISE THE MACHINE OR LAUNDRY COULD GET DAMAGED. ENSURE THAT THE DOORS FIT TOGETHER PERFECTLY AND ARE PROPERLY CLOSED. Loading Open the washing machine lid.
- Page 11 Detergent load Maximum pre-wash and main wash washing powder Maximum Main wash washing liquid Maximum bleach and scenting agent recommended The detergent dispenser is divided into 4 compartments: .- Compartment I is for the pre-wash detergent. .- Compartment II is for the main wash detergent. .- The compartment is for bleach.
- Page 12 Specific / special programmes SPECIAL RINSE PROGRAMME Programme runs 3 rinses with spins at 800 rpm (this speed may be reduced or spin cancelled using the appropriate button). It works for all fabrics and can be used, e.g. after garments are hand washed. SPECIAL HIGH-SPEED SPIN PROGRAMME Programme runs a spin at the speed indicated in the programme table.
- Page 13 General recommendations CLEANING AND MAINTENANCE OF THE MACHINE Do not use abrasives, spirits or solvents when cleaning the exterior of the washing machine. It is sufficient to use a damp cloth. The washing machine requires very little maintenance. • Drying the rubber seal of the drum. •...
- Page 14 CLEANING THE DETERGENT DISPENSER AND ITS COMPARTMENTS .- It is advisable to clean the four compartments of the detergent dispenser (pre-wash, wash, bleach and fabric conditioner) from time to time. To do this, remove the detergent dispenser and after cleaning it, fit it back in place. To remove and fit the detergent dispenser, follow the steps indicated in the images.
-
Page 15: Troubleshooting
Troubleshooting FAULT CAUSE SOLUTION 1.- No programme works • The appliance is not plugged • Plug it in. • The general switch is discon- • Activate the general switch. nected. • Check. • There is no electricity. • The fuses in the electric insta- •... - Page 16 Washing hints Hints on the most economical, most environmentally friendly way to use your washing machine. HINTS ON USING YOUR WASHING MACHINE Wait until you have a full load before using the machine: this will avoid the use of more water and power than necessary.
- Page 17 BLEACH Bleach is widely used to whiten fabrics, although in some cases it can cause irreparable damage. There are various symbols which refer to its use. • Bleach can be used. • Do not use bleach. WEEE This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
- Page 18 12.03.08/ M-46004669 EN...
Need help?
Do you have a question about the CTD 10662-07 and is the answer not in the manual?
Questions and answers